Main product image
    BACK TO PRODUCT CATEGORY
    WJ-PR201
    Key Features
    Up to 4 network cameras
    Power over Ethernet Plus (PoE+)
    Use over long distances
    Enquire about this product Full Specification Where to buy this product

    The coaxial - LAN converter can be used for distances of up to 300 m (984 feet) for PoE+ connections and 500 m (1,640 feet) for PoE connections, and 2.0 km (6,560 feet) for non-PoE+ connections. (When used with RG-6/U coaxial cable, and the loop resistance is below 4 Ω/100 m {328 feet} without additional joint parts.)

    Two models are provided on the receiver side

    WJ-PR204 - 4-channel
    WJ-PR201 - 1-channel

    Camera side

    WJ-PC200

    Up to 4 network cameras can be connected and used on a single receiver side unit.(WJ-PR204) and are Power over Ethernet Plus (PoE+) ready.
    The coaxial - LAN converter is compliant with PoE+ standards (IEEE802.3at) and PoE+ cameras can be connected and used*1.

    WJ-PR201| Coaxial-LAN Converter - Easy migration from analog to IP system with existing coaxial cable

    Coaxial-LAN Converter for CCTV Cameras Diagram

    High-speed transmission

    The coaxial - LAN converter is capable of transmission speeds of 35 Mbps or over for TCP*2, and 45 Mbps or over for UDP connections*2.
    (When used with RG-6/U coaxial cable, and for distances under 2.0 km (6,560 feet) [PR201], 500 m (1,640 feet) [PR204]

    No setup required

    Connections can be established by simply connecting the coaxial cable to the coaxial - LAN converter.

     

    *1 There are limitations on the combinations of the cameras to be connected, the type of power supply and transmission range to the receiver side units.
    For more detail please see the operating instructions on our website
    (https://security.panasonic.com/pss/security/support/info.html).

    *2 Transmission speed is the speed of transmission between the receiver side unit and the camera side unit.
    Values may vary depending on the condition of the coaxial cable (for example, as the cable deteriorates over time), network conditions, etc.

    Show more
    • Images
    • Brochures
    Product
    Image Data
    Marketing
    Spec Sheets
    Brochures
    Technical
    Firmware
    Release Notes
    Operating Instructions
    Ecodesign
    Ecodesign
    Service and Support
    • WJ-PR201 Product Image (png)
      WJ-PR201 Product Image (png)
      Coaxial - LAN Converter 1-channel receiver side  WJ-PR201 Product Image 
      Mon, 01/10/2018 - 14:39
      Download png - 290.73 KB
    • Catalogue Vertical Solution No.2 Transportation
      Catalogue Vertical Solution No.2 Transportation
      No.5A-002D, 4th Edition, PDF data
      Tue, 20/03/2018 - 09:19
      Download pdf - 9.25 MB
      Catalogue Vertical Solution No.4 Logistics
      Catalogue Vertical Solution No.4 Logistics
      No.5A-004A, 1st Edition, PDF data
      Tue, 20/03/2018 - 09:19
      Download pdf - 4.59 MB
      Catalogue i-PRO EXTREME series (July 2020)
      Catalogue i-PRO EXTREME series (July 2020)
      No.2B-017DA
      Fri, 12/04/2019 - 11:59
      Download pdf - 17.15 MB
      Catalogue i-PRO EXTREME City Surveillance (July 2019)
      Catalogue i-PRO EXTREME City Surveillance (July 2019)
      No.5A-001C
      Wed, 10/07/2019 - 05:54
      Download pdf - 12.47 MB

    Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

    General service & downloads Contact technical support

    Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

    General service & downloads Contact technical support

    There are currently no key services available.

    Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

    General service & downloads Contact technical support

    There are currently no other services available.

    Specifications

    Specification documents
    WJ-PC200/WJ-PR201/WJ-PR204 Spec Sheet A4 - 456.64KB
    Generate data sheet
    Power Consumption Use the included AC adapter. 　DC 57 V / 700 mA / Approx. 40 W Use the PoE power supply 　PoE DC 48 V : 265 mA / Approx. 12.95 W (Class 0 device)
    Mass (Approx.) 250g (0.55 lbs)
    Finish Main unit : PC/ABS Silver, BNC connector cover : ABS White
    Operating Environment Temperature : 0 to 50 °C {+32 °F to +122 °F} Humidity : 10 % to 90 % (without condensation)
    Power Supply Use the included AC adapter. 　INPUT : 100 - 240 V 50/60 Hz 　OUTPUT : DC 57 V / 1.14 A Use the PoE power supply 　PoE DC 48V / Approx. 265 mA
    Dimensions (W x D x H) Main Body : 105 mm x 44 mm x 98 mm {4-5/32 inches x 1-3/4 inches x 3-7/8 inches} When a BNC connector cover is mounted : 105 mm x 44 mm x 165 mm {4-5/32 inches x 1-3/4 inches x 6-1/2 inches}
    Interfaces 10Base-T/100Base-TX x 1 BNC connector : x 1